saniVex is a liquid chemical disinfectant utilizing a specially formulated anti-microbial agent that is released as a small amount of gas from the applied liquid. saniVex is a broad spectrum product proven effective in killing significant bacterial, fungal and viral contaminants including E.Coli 0157:H7, Salmonella, Aspergillus, Listeria, Staphylococcus and Pseudomonas. It is labeled and approved by the EPA as disinfectant.

The specially formulated saniVex chemistry is a potent oxidizer that works by breaking down the essential proteins resulting in the destruction of the microbial contaminant.

saniVex should be utilized whenever there is a chance that a surface has been contaminated with microbial agent. In addition, saniVex should be used to maintain areas and surfaces on a routine basis that are subject to potential contamination or microbial growth.

saniVex can be used to disinfect nonporous surfaces in a healthcare environment including facilities in health clinics, extended care facilities, hospitals, restrooms, showers, water baths, patient transport equipment. saniVex is potent oxidizer which may cause discoloration on adjacent non-colorfast fabrics or carpets. It is recommended to test a small area prior to application.

Yes. saniVex works as a deodorizer by breaking down the proteins responsible for creating the odor.

For best results, saniVex should be allowed to air dry. Users should follow all state and local regulations when using saniVex.

saniVex leaves no active residue after drying. A properly treated surface should be safe to use after it has dried. The specially formulated chemistry has been EPA registered for disinfection.

No, it is recommended to lightly mist the area with saniVex and let air dry. Before areas are treated with saniVex, they should be cleaned of any debris. After treating with saniVex, it is not necessary to scrub or wipe, making it easy to use and convenient for the health care industry.

The saniVex solution has a shelf life of one year. The activated solution is recommended for use within one week of preparation.

It is important to read all mixing instruction on the product label prior to use. saniVex must be prepared according to the individual use applications (quart, gallon or tub) for the product being used. In most cases, the saniVex pre-measured concentrate is poured into a spray bottle, applicator or dispensing container. Clean water is added to the appropriate fill level and the activator packet is added last. Activated saniVex solutions should be allowed to sit for 15 minutes prior to use.

It is recommended, for the greatest disinfecting activity, to use the activated solution within one week of preparation. Unlike bleach, you will not have to mix or activate saniVex on a daily basis.

The mild transient chlorine odor and yellowish color indicates that the disinfecting action has been activated. The specially formulated chemistry is now ready to use as an anti-microbial agent.

The activation of saniVex releases specially formulated properties. Activation assures that you have the highest potency product.

saniVex is a fast acting, highly potent anti-microbial disinfectant. No common household product contains the specially formulated chemistry or bacterial killing power of saniVex.

SaniVex Technologies, Inc is a Female/Minority owned Small Business with a valid Dunn & Bradstreet number and is a Registered Central Contractor.